Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATV312HU11M3Main Range of product Altivar 312 Product or component type Variable speed drive Product destination Asynchronous motors Product specific application Simple machine Assembly style With heat sink Component name ATV312 Motor power kW 1. 1 kW Motor power hp 1. 5 hp [Us] rated supply voltage 200 240 V 15 10 % Supply frequency 50 60 Hz 5 5 % Network number of phases 3 phases Line current 8. 5 A at 200 V, Isc = 5 kA 7. 4 A at 240 V EMC filter Without EMC
Main
| Range of product | Altivar 312 |
| Product or component type | Variable speed drive |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Assembly style | With heat sink |
| Component name | ATV312 |
| Motor power kW | 1.1 kW |
| Motor power hp | 1.5 hp |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network number of phases | 3 phases |
| Line current | 8.5 A at 200 V, Isc = 5 kA 7.4 A at 240 V |
| EMC filter | Without EMC filter |
| Apparent power | 3 kVA |
| Maximum transient current | 10.4 A for 60 s |
| Power dissipation in W | 71 W at nominal load |
| Speed range | 1…50 |
| Asynchronous motor control profile | Sensorless flux vector control with PWM type motor control signal Factory set : constant torque |
| Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5 mm² AWG 14 |
| Supply | Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection |
| Communication port protocol | Modbus CANopen |
| IP degree of protection | IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part |
| Option card | Communication card for CANopen daisy chain Communication card for DeviceNet Communication card for Fipio Communication card for Modbus TCP Communication card for Profibus DP |
Complementary
| Supply voltage limits | 170…264 V |
| Network frequency | 47.5...63 Hz |
| Prospective line Isc | 5 kA |
| Continuous output current | 6.9 A at 4 kHz |
| Output frequency | 0…500 kHz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...16 kHz adjustable |
| Transient overtorque | 170…200 % of nominal motor torque |
| Braking torque | 150 % during 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
| Regulation loop | Frequency PI regulator |
| Motor slip compensation | Suppressable Adjustable Automatic whatever the load |
| Output voltage | <= power supply voltage |
| Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 0.8 N.m |
| Insulation | Electrical between power and control |
| Analogue input number | 3 |
| Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm AI3 configurable current 0...20 mA, impedance: 250 Ohm |
| Sampling duration | AI1, AI2, AI3: 8 ms analog LI1...LI6: 4 ms discrete |
| Response time | AOV, AOC 8 ms for analog R1A, R1B, R1C, R2A, R2B 8 ms for discrete |
| Linearity error | +/- 0.2 % for output |
| Analogue output number | 1 |
| Analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits |
| Discrete input logic | Logic input not wired (LI1...LI4), < 13 V (state 1) Negative logic (source) (LI1...LI6), > 19 V (state 0) Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic: (R2A, R2B) NC - 100000 cycles |
| Minimum switching current | R1-R2 10 mA at 5 V DC |
| Maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms |
| Discrete input number | 6 |
| Discrete input type | (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.1 to 999.9 s S, U or customized |
| Braking to standstill | By DC injection |
| Protection type | Input phase breaks: drive Line supply overvoltage and undervoltage safety circuits: drive Line supply phase loss safety function, for three phases supply: drive Motor phase breaks: drive Overcurrent between output phases and earth (on power up only): drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: motor |
| Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
| Local signalling | 1 LED (red)drive voltage: Four 7-segment display unitsCANopen bus status: |
| Time constant | 5 ms for reference change |
| Frequency resolution | Analog input: 0.1...100 Hz Display unit: 0.1 Hz |
| Connector type | 1 RJ45 for Modbus/CANopen |
| Physical interface | RS485 multidrop serial link |
| Transmission frame | RTU |
| Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen 4800, 9600 or 19200 bps for Modbus |
| Number of addresses | 1…127 for CANopen 1…247 for Modbus |
| Number of drive | 127 for CANopen 31 for Modbus |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 143 mm |
| Width | 105 mm |
| Depth | 132 mm |
| Net weight | 1.7 kg |
Environment
| Dielectric strength | 2040 V DC between earth and power terminals 2880 V AC between control and power terminals |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 |
| Standards | IEC 61800-5-1 IEC 61800-3 |
| Product certifications | GOST CSA C-Tick NOM UL DNV |
| Pollution degree | 2 |
| Protective treatment | TC |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3 |
| Ambient air temperature for storage | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without (with protective cover on top of the drive) -10…60 °C with derating factor (without protective cover on top of the drive) |
| Operating altitude | <= 1000 m without 1000...3000 m with current derating 1 % per 100 m |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 753 reviews
Sort
Product Reviews
★★★★★ 5
Wood bar cart
Color: Brown, Size: 13"D x 17"W x 33"H, Color: Brown, Size: 13"D x 17"W x 33"H
Great piece for my den. Classic look and fits my preppy style well. Easy to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
★★★★★ 5
Great Bar Cart/Coffee Bar
Color: Brown, Size: 13"D x 23.7"W x 32.7"H
Easy set up, good size, great for decor and holding bottles!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 3, 2026
★★★★★ 5
Perfect for the Price!
Color: Greige, Size: 13"D x 23.7"W x 32.7"H
The bar cart was very easy to put together. I can be "mechanically challenged" and was able to do it myself LOL
It's nice and sturdy, the wheels roll smooth when you move it. The size is perfect for the small wall I have it against.
I have several bottles of liquor and bartending mixer set on top, and about 20 various glassware on the 2nd shelf.
The bottom shelf is taller, and does let you stand larger bottles down there. The one racks will only for the smaller size, but does hold them well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 6, 2024
★★★★★ 3
Decent bar cart, but very annoying assembly
Color: Marble White, Size: 13"D x 23.7"W x 32.7"H
I think it looks nice and is decent value, but this thing is a pain to put together. Instead of just sending 3 shelves, you get 6 pieces to connect together to make 3 shelves. On top of that - they don’t even really connect. It would be 1000x easier if they added a couple of wooden pegs to connect the 2 pieces together. Instead, you have to do a balancing act which is tedious as can be. I ended up super glueing 2 of the 3 shelves togethers after how annoying the first was, so I would highly recommend you do the same.
The whole process of putting it together feels like a balancing act. For something so small, it’s about as annoying as possible to put together. Nearly every step requires you to balance something and screw it in. Most of this would be alleviated if, as I said, it was just 3 pieces for the shelves instead of 6. But, you get what you pay for. Overall, I can’t complain too much for the price and result, but I wasn’t a fan of building it. It’d also look a little nicer if each shelf didn’t have a crack going through it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2026
★★★★★ 5
Cosina
Color: Black, Size: 9.4*4.1*5IN
Excelente producto
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
recommand products
Suteni Q06S5 3-in-1 Detachable Bottle Opener Card Bag Magnetic Top-Bottom Spliced Vegan Leather Phone Case, For iPhone 13 Pro Max, For iPhone 13 Pro, For iPhone 13, For iPhone 12, For iPhone 12 Pro Max, For iPhone 12 Pro
14.00
Countersink 90°, HSS-XE Blue-Tec coated 3-flat-shank, DIN 335 d=10,0mm
19.85
Countersink 82°, HSS-XE+ Blue-Tec coated 3-flat-shank, DIN 335 d=7/8' (d=22,0mm)
34.55
Countersink 90°, HSS-XE with morse taper 3, DIN 335 d=50,0mm
97.30
Suteni G1S5 2-in-1 Magnetic Detachable Bottle Opener Card Bag Cow Leather Back Phone Case, For iPhone 17 Pro Max, For iPhone 17 Pro, For iPhone 17, For iPhone Air, For iPhone 16 Pro Max, For iPhone 16 Pro, For iPhone 16 Plus, For iPhone 16
10.00